Product features

• High precision, wide linear range, good consistency；
• Small volume, light weight, convenient installation and transportation；
• Directly welded on PCB;
• Structure using high temperature resistant materials, to ensure reliable operation at -40 C ~+85 c;
• Using epoxy resin, guarantees the mechanical strength and electrical strength;
• Can suppress EMC common mode differential mode surge interference.

Parameter description

• Rated input current: 0~10A;
• Rated output voltage: 0~7.07V;
• Load impedance：≥50kΩ；
• Ratio error:5%~200% rated input,ratio difference ＜±0.1%；
• Phase difference:5%~20% rated input,phase difference＜±15′,20%~80% rated input,phase difference＜±8′,80%~200% rated input,phase difference＜±5′;
• Linear range:5%~200%(Even more)
• Short-time thermal current and time:2In/ continuous, 10In/10s, 40In/1s;
• Power consumption limit:0.5VA；
• Insulation resistance:100MΩ@500Vdc；
• Dielectric strength:3000V/min 2mA 50Hz；
• impulse voltage:5000V（1.2/50μs standard lightning wave）；
• Rated frequency:50Hz。

Structure description

• Shell material:PBT reinforced flame retardant material;
• Internal insulation:epoxy resin;
• Terminal:The input for the high temperature wire, the output for the needle tube, convenient welding;
• Tube length:5~6mm；
• Product weight:＜60g；
• Product outline tolerance:：±0.3mm。